How to Fix “The Network Path Was Not Found” Error on Windows

Microsoft allows devices connected to the same network to access each other’s data and share files remotely. When you need to use two devices simultaneously, this process of sharing data and resources can be very helpful. However, sometimes users encounter errors, which can make the process quite tedious and unpleasant.


One such common problem is the “network path name not found” error, which occurs when users attempt to connect to a remote device. If you are facing a similar problem, we have discussed six troubleshooting methods below that will help you fix the error in no time.

1. Check path names

If you encounter the “network path name not found” error, the first thing you should do is double-check the path name you entered. A small mistake in the path name will prevent the system from finding the path to the connected network.

While you’re at it, we also recommend checking if the sharing feature is enabled on the device you want to share files with. If not, enable it and then try performing the action that was previously causing the error.

Here’s how to make the targeted drive on the remote computer shareable:

  1. Right-click on the targeted drive and choose Properties from the context menu.
  2. In the next dialog box, navigate to the Sharing tab and check the network path status.
  3. If it says Not Shared, click the Advanced Sharing button.
  4. Check the box associated with Share this folder and note the drive’s share name.
  5. When finished, click Apply > OKAY to save changes.

Now you can check if the drive is accessible after following the above steps.

2. Temporarily disable your antivirus

Another common culprit that often prevents users from connecting to networks, sharing files, and downloading apps from third-party sources is overprotective antivirus.

Antivirus’ job is to identify malicious activity and block it, but sometimes these security programs also start labeling legitimate processes as threats, blocking them completely.

If you are using a third-party security program on your operating system, we recommend that you temporarily disable it and then try to connect to the remote computer and share files. If the antivirus was causing the problem, disabling it should fix the problem for you.

You can also try disabling Windows Defender if you use it and see if that helps. However, once you are done sharing the files, make sure to re-enable the antivirus immediately, as keeping it disabled for a long time can expose your PC to threats.

3. Try to connect using an IP address

You can also connect to the remote computer using the IP address. In this method, we will use the command prompt to make it work.

Here is what you need to do:

  1. Hurry To win + R to open Run.
  2. Type cmd in the text field of Run and press CTRL + Gap + Walk in to open the command prompt as an administrator.
  3. In the command prompt window, type the command mentioned below and press Walk in to run it:
    ipconfig /all​​​
  4. Scroll down and bit and note the address for the IPv4 address.
  5. Now open a Run dialog again and paste the IPv4 address you wrote down in the text field here.
  6. Click on Walk in and see if you can connect to the remote computer successfully.

4. Restart the TCP/IP NetBIOS Helper Service

To connect to a remote device and share files with it, certain services on Windows must work properly. One of the most important services in this case is the TCP/IP NetBIOS Helper service. As such, we recommend restarting it to make sure it’s working.

Here is what you need to do:

  1. Open Run by pressing To win + R.
  2. Type services.msc in Run and press Walk in.
  3. In the Services window, find TCP/IP NetBIOS Helper and right click on it.
  4. Picking out Properties from the context menu.
  5. In the next dialog box, click the Stop button.
  6. Wait a few seconds then click Begin.
  7. Now expand the drop-down list for startup type and choose Automatique.
  8. Click on Apply > OKAY to save changes.

Once done, check if this fixes the issue for you.

5. Enable PME 1.0

SMB is a network protocol that allows users to access shared files and printers in Windows. This is disabled by default in Windows, but enabling it can help you connect to a remote device and share files over the network.

In this method, we will allow it to share the files. However, we strongly suggest that you disable it after use as it is known to have security vulnerabilities that can mess up your system.

Here is what you need to do:

  1. Type Control Panel in Windows search and click Open.
  2. In the next window, go to Programs > Programs and Features.
  3. Picking out Enable or disable Windows features from the left pane.
  4. Now look for SMB 1.0/CIFS file sharing support and check the box associated with it.
  5. Click on OKAY to save the changes and check if the error is now fixed.

6. Reset TCP/IP

Finally, if the above methods did not work for you, you may consider resetting TCP/IP, which will return all IP protocols and DNS entries to their default state.

This fix is ​​known to fix almost all network-related issues that pop up in Windows from time to time and hopefully fix the current error for you as well.

Network path error, resolved

Connecting to another device on the network and sharing files should be a seamless process. Hopefully, the troubleshooting methods mentioned above will help you get network functionality up and running in no time. However, if the error persists, you may consider using another file sharing service like Google Drive until Microsoft releases an official fix for this issue.

Comments are closed.